Metrologist

Title: CMM Metrology Technician

Position: Full Time / Non-Exempt

Location: Riverside, CA

Reports to: Quality Engineering Manager

• Schedule M-F 7:30AM - 4:00PM $33-$38/per Hr ******************

Summary Of Role

The Metrologist is responsible for performing dimensional and functional inspections in accordance with part drawings, customer requirements, and applicable standards (e.g., ASME Y14.5). This role supports quality, manufacturing, and validation activities by ensuring accurate measurement methods, reliable data, and proper maintenance of metrology equipment. The position requires close collaboration with Quality Engineering, Quality Control, and Process Engineering teams, as well as interaction with external calibration vendors and suppliers.

Duties And Responsibilities

• Metrology & Inspection:
• Program and operate tactile CMMs and optical systems (OGP/SmartScope Flash 500)
• Good knowledge in programming in Zone 3, Measure X, Measuremind 3D, MCOSMOS
• Use of a variety of measuring tools, (micrometers, calipers, no/no-go gages, bore gages, height stands, etc.)
• Perform dimensional inspections including First Article Inspection (FAI) and layout inspections
• Develop and optimize measurement methodologies and inspection strategies
• Interpret engineering drawings and apply GD&T per ASME Y14.5
• Equipment & Calibration:
• Maintain and monitor calibration status of all inspection equipment
• Perform/coordinate calibration and preventive maintenance activities
• Troubleshoot and support debugging of metrology equipment
• Interface with external calibration vendors as required
• Maintain calibration and preventive maintenance schedules
• Data Analysis & Validation Support
• Perform Gage R&R and process capability studies (Cp, Cpk, Ppk)
• Analyze measurement data to identify out-of-spec conditions and trends
• Support process validations (IQ/OQ/PQ) and engineering studies
• Ensure data integrity, traceability, and proper documentation
• Process Improvement & Support:
• Designing of fixtures, jigs, and other holding items for part inspection Develop inspection standards, forms, and work instructions
• Train Quality Control personnel on measurement techniques and GD&T
• Support customer and internal audits as needed
• Collaborate with cross-functional teams on quality issues and root cause investigations
• Compliance & Documentation:
• Ensure compliance with applicable SOPs, cGMP, and quality standards
• Document and report deviations, OOS conditions, and anomalies
• Maintain organized records for inspection data and first article samples

Minimum Requirements And Qualifications

• Associate degree or equivalent/training preferred.
• 5 years’ experience as a Metrology inspector with increasing levels of responsibility
• 3-5 years’ experience in plastic injection molding
• Experience with CMM’s and Optical OGP Smart scope’s and all hand held metrology tools such as micrometers, calipers, no/no-go gages, bore gages, height stands, etc.
• Working knowledge of PCDMIS, Measure Mind 3D and MCOSMOS
• Blueprint reading, including knowledge in Geometric Dimensioning and Tolerancing (GD&T) and ANSI Y14.5.
• Good understanding of Cosmetic defects in plastics and Visual inspections.
• Understands theory and uses of SPC, SQC and process capability studies.
• Experience in the IQ, OQ, PQ Validation process
• Excellent verbal and written communication skills
• Computer literate (Microsoft Excel, Word, SPC program, etc.). Minitab experience is a plus

PREFERRED QUALIFICATIONS

• Advanced CMM Training
• GD&T training and understanding
• Experience in the IQ, OQ, PQ Validation process
• Development and implementation of new fixturing and measurement techniques

Essential Functions And Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job the employee must be able to use reasonable dexterity in manipulating tools and components.
• Visual acuity is required as well as the ability to speak and hear.
• The employee must frequently move items up to 10 pounds and must occasionally move items up to 40 pounds

WORK ENVIRONMENT

• The work environment is usually in an office within a manufacturing facility with low to moderate noise levels. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.